AIR CLEANER SERVICE
1.
Open the left maintenance cover by turning its latch
counterclockwise.
2.
Loosen the cover screws and remove the air cleaner cover.
3.
Remove the foam air filter from the air cleaner cover.
4.
Check the foam air filter to be sure it is clean and in good condition.
If the foam air filter is dirty, clean it as described on page
Replace the foam air filter if it is damaged.
5.
Reinstall the foam air filter in the air cleaner cover.
6.
Reinstall the air cleaner cover.
7.
Close the left maintenance cover.
Operating the engine without an air filter, or with a damaged air filter,
will allow dirt to enter the engine, causing rapid engine wear. This type
of damage is not covered by the Distributor's Limited Warranty.
SERVICING YOUR GENERATOR
FOAM AIR FILTER
AIR CLEANER
COVER
COVER SCREW
50
.
49