Honda EU6500is Owner's Manual page 90

OPTIONAL PARTS
4. Pass the remote control cable through the supplied wire grommet
and fit the grommet into the battery maintenance cover knockout.
5. Plug the remote control cable into the 6-pin connector.
6. Install the battery maintenance cover and tighten the cover screw.
REMOTE
CONTROL CABLE
BATTERY MAINTENANCE
COVER
7. To avoid accidentally unplugging the remote control cable, secure
the cable to the generator frame with a cable tie as shown.
Never operate the generator
without the battery maintenance
cover in place, as poor engine and
generator performance will result.
When the remote control is not
being used, replace the plug on the
connector.
88
GROMMET
REMOTE CONTROL
CABLE
REMOTE CONTROL BOX
CABLE TIE
PLUG