Connecting To Home Power; Connecting To Car Power; Connecting To Watch Tv,Vcr Or Dvd - AWA LT20D User Manual

Connecting to Home Power

Make sure that the set s MAIN
POWER is switched OFF before
Home
connecting it to power.
Power connecter
After use, the AC Adapter should be
unplugged from the AC supply and
detached from the set.

Connecting to Car Power

Connect to the vehicle s CIGARETTE LIGHTER SOCKET by using the DC CAR CORD
accessory as shown in the diagram.
TO DC INPUT JACK
CIGARETTE
CIGAR PLUG
SOCKET
DC CAR CORD
Note : The cable assembly used to connect the set to the 12-Volt power supply varies
depending on product packaging.
"(
TO DC INPUT
JACK
AC ADAPTER
Connecting to watch TV, VCR or DVD
Connecting a DVD Player (Connecting to Y, P
1. Connect a set of audio cables between the component AUDIO IN jacks on the TFT
LCD TV and the AUDIO OUT jacks on the DVD Player.
2. Connect video cables between the Y, P and P inputs on the TFT LCD TV and Y, P
b r
and P outputs on the DVD Player.
r
(Note : For an explanation of Component video, see your DVD Player's Owner's
manual.)
Connecting the Aerial or Cable Television Network
To view television channels directly, a signal must be received by the set from one of following
sources:
An outdoor aerial
An indoor aerial (not recommendable)
A cable television network
1. In the first three cases, connect the aerial or network input cable to the 75 ohm coaxial socket
on the rear of the TFT LCD TV.
2. Press the TV button on the remote control.
Connecting the VCR, DVD or Other external devices
1. Connect video and audio cable according to the shape and color or the video / audio cable.
When an external devices is in MONO, the audio connection cable can be connected to
either the left and S.MODE/MTS should be set MONO.
2. For optimal visual image, use S-VIDEO connector instead of video (yellow) connector.
, P )
b r
b
")