Setup Setting (Auto Program); Setup Setting (Manual Program) - AWA LT20D User Manual

51 cm tft lcd tv
Table of Contents

Advertisement

Setup Setting
AUTO PROGRAM
You can scan the frequency ranges available on your
television in your country and store all the channels found
automatically.
The channels are stored in the order in which they appear
in the frequency bands. It is possible that the automatical-
ly allocated numbers may not correspond to those by
which you wish to identify the channels.
If this is the case, you can then sort them manually.
1. Press the MENU button.
Result : The "PICTURE" menu is displayed.
2. Press the PROG[ ] or PROG[ ] button to select
"SET UP"
3. Press the VOL[ - ] button.
Result :The "SET UP menu is active.
4. Press the PROG[ ] button.
5. Press the VOL[ - ] button.
Result : The "AUTO PROGMAM" menu is active.
6. Press the PROG[ ] button.
7. Press the VOL[ - ] button.
Result: The "START" menu is active.
8. Press the VOL[ - ] button.
Result: The horizontal bar is displayed, and then
channels are stored in an order which reflects
their positions in the frequency range. Finally,
the search will end automatically.
9. When searching and storing is complete,
"AUTO PROGRAM" menu is displayed.
10 Press the PROG[ ] button.
Result: The "Color System" menu is displayed.
11. Press the VOL[ + ] or VOL[ - ] to select the
broadcast color system which you want.
%"
Setup Setting
MANUAL PROGRAM
When storing Channels manually, you can
choose whether or not store each of the channels
found.
The number by which you wish to identify each
stored channel.
1. Press the MENU button.
Result: The "PICTURE" menu is displayed.
2. Press the PROG[ ] or PROG[ ] buttons to
select "SET UP".
3. Press the VOL[ - ] button.
Result: The setup menu is active.
4. Press the PROG[ ] or PROG[ ] button to select
"MANUAL SEARCH".
5. Press the VOL[ - ] button.
Result: The MANUAL SEARCH menu is
active.
6. Press the PROG[ ] or PROG[ ] button to select
Sound System and press the VOL[ - ] button,
pressPROG[ ] or PROG[ ] button repeatedly
until the sound is of the best quality.
Result: The Sound system is changed.
7. With same method, it will want and to set the
system, the program, the fine and the name
of channel which it will be able to store.
Store
"[ - ]"
Exit
"MENU"
,
8. When you have finished, press the MENU button
repeatedly to return to normal viewing.
%%

Advertisement

Table of Contents
loading

Table of Contents