Page 1
MHDV3209-F4 32"(81cm) FULL HD LCD Television USER MANUAL Please read this User Manual carefully to ensure use of this product and keep this manual for future reference N294...
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTION WARNING: 1.Read these safety instructions. To prevent fire or shock hazard, do not expose this 2.Keep these safety instructions. appliance to rain or moisture. 3.Heed all warnings. 4.Follow all safety instructions. Thank you very much for purchasing this TV. To enjoy 5.Do not use this apparatus near water.
INSTALLATION Never stand on, lean on, or suddenly push the television or High voltages are used in the operation of this television its stand. You should pay special attention to children. receiver. Do not remove the cabinet back from your set. Serious injury may result if it falls.
INSTALLATION Front panel KEYBOARD SOURCE MENU VOL+ 1 SOURCE Display the input source menu. 1: Remote control sensor. 2 MENU 2: Indicator LED: GREEN POWER ON. isplay main MENU. 3 CH+/CH- STANDBY. In TV mode press CH+ or CH- to change 3: Key board the channel up and down.
INSTALLATION CONNECTING TO PC STEPS: Be sure both the TV and computer are set to Power off. 1.Connect VGA and audio cable. 2.Connect the power cord. 3.Power on the TV, switch the input source to VGA mode. 4.Power on the PC. This sequence is very important.
INSTALLATION CONNECTING TO AV EQUIPMENTS This TV provides two groups of AV ,two S-Video,one group of YPbPr for convenient connection to VCR,DVD or other video equipment,three group of HDMI for HD signal input Please refer to the owner s manual of the equipment to be connected as well. You can use the input terminals on TV set rear as follows.
REMOTE CONTROL POWER :To set the TV to standby or KEYS FUNCTION power on. NUMERIC KEY For direct access to channels. TV MENU :To display TV menu. POWER MUTE CURSOR :To move within the menu. CH.LIST :To display the channels list. AUDIO VOL+/- :To adjust sound level.
OPERATION BASIC OPERATION TURN ON THE UINT Press the POWER button on the remote control to switch on the power. The power indicator will light up in green colour, press the POWER button again to switch off the power, and the indicator will change to red. CHANNEL SEARCH Press the SOURCE button on the remote control to select the TV or DTV input mode, and press the OK button to confirm.If you are using the unit for the first time, an Installation Guide menu will be displayed to guide you...
OPERATION TELETEXT Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.) Press : You Will obtain:...
OPERATION 1).Auto Tuning: Search all the channels automatically EPG (Electronic Programme Guide) (ATV, DTV & Radio) The EPG (Electronic Programme Guide) menu is used to look at what is being broadcast on a DTV Please select country first or Radio channel at a later point in time. Press the then select Start to update info EPG button to access the EPG menu, t...
Page 13
OPERATION 2. PICTURE MENU Storage To: To select the channel number you want to save to. The second item of the menu is PICTURE menu. To select the TV sound system. System: You can adjust picture effect here, including contrast, Current CH: To select the current channel.
Page 14
OPERATION 3.SOUND MENU 6.LOCK MENU The third item of the menu is the SOUND menu. The sixth item of the menu is the LOCK menu. You can adjust the sound effect here, including You can lock system, set password, block program, treble, bass and balance as well as other sound set parental guidance, restore factory default and set functions.
TROUBLESHOOTING Problem Check Picture Audio antenna position, direction Snow Noise or connection antenna position, direction Ghost or connection Normal audio electronic equipment,car/ Interference Noise motorcycle,fluorescent light Volume(check if mute is activated or if the audio system Normal Picture Mute connections are not correct) Power cord is not inserted Power switch is not opened Contrast and brightness/volume...