Choose Your Connection
There are several ways to connect your television,
depending on the components you want to connect
and the quality of the signal you want to achieve be
displayed. The following are examples of some different
ways to connect your TV with different input sources.
Connecting a VCR
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
AV IN
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
A
Connect the audio and video cables from the VCR's
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
B
Insert a video tape into the VCR and press
the VCR. (Refer to the VCR owner's manual.)
C
Select the input source with using the
on the remote control, and then press
to select the source, press ENTER button to confirm.
External A/V Source Setup
Back of VCR
Video= yellow
Audio left= white
Audio right= red
Back of TV
PLAY on
INPUT button
/
button
How to connect
Connect the audio and video cables from the
external equipment's output jacks to the TV input
jacks, as shown in the figure.
When connecting the TV to external equipment,
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
Camcorder or video
game set
Back of TV
AV IN
How to use
A
Select the input source using the
the remote control.
B
Press the
/
button to select the desired source.
C
Press the
ENTER button to confirm.
D
Operate the corresponding external equipment.
Connecting a DVD player
How to connect
A
Connect the DVD video outputs (COMPONENT) to
the Y Pb Pr jacks on the TV and connect the DVD
audio outputs to the Y Pb Pr Audio IN jacks on the
TV, as shown in the figure.
B
If your DVD only has an S-VIDEO output jack, connect
this to the S-VIDEO input on the TV, as shown in the
figure.Alternatively, you can connect the DVD player
to your TV using the audio and video jacks, similar
to connecting a VCR (refer to the VCR figure on the
previous page).
Installation
Video= yellow
Audio left= white
Audio right= red
INPUT button on
Haier LED HDTV
EN-8