Table of Contents
Advertisement
Quick program view
Press to jump back and forth between two channels. The
TV alternates between the current channel and the last
channel that was selected.
If you want to return to the last watched previously
viewed program channel 8, you can simply press the
RECALL button.
USB Input
A
Supported media and file formats: Digital pictures
(.JPG/.JPEG/.BMP(Baseline & Progressive)/.PNG)and
digital music (.MP3(8~320kbps))
Due to differences in the file code and file mode, It is
possible that some files cannot be read.
B
Before starting operation, verify that the USB
storage device is of using the FAT32 file system
format. At present, this television does not support
NTFS and the file systems of other formats.
C
Supports USB/Memory Card Plug & Play (don't need
to reset TV system),USB Hard-drive support - only
supports the class of USB HD that follows USB power
consumption spec.
D
The television operation may be halted due to
excessive rate of information code errors. In such
cases, restart the system. Please note - there are
many nonstandard USB mobile devices in the
market. If a nonstandard device is used then an
identification problem may occur.
USB Media Menu operation
A
Plug-in an external storage device into USB port.
B
Press the
USB button on the remote to display
multimedia.
C
Press the
ENTER button on the remote to display
the sub page.
D
Press the
EXIT button on
previous
menu.
the remote to return to the
To play pictures
A
Press the
USB button on the remote conrtol to enter
USB media system.The system start up takes about
3 seconds.
Ensure that the USB drive is inserted in the USB
input.
B
Use the
/
buttons to select JPEG Pictures , Press
the ENTER button to enter.
OK Enter
C
Press the
/
/
/
file, and then press the ENTER button to enter the play
interface.
OK Enter
D
Press the
MENU button to display the options list.
Operation
EXIT Usb
buttons to select folder or
EXIT Usb
Haier LED HDTV
EN-22
Advertisement
Table of Contents
