Table of Contents
Advertisement
control to select the option Vivid, Standard, Energy
Savings, Theater, Sports and Custom.
How to customize your own picture status
A
Press the
MENU button and then use
the
/
buttons to select Picture menu.
B
Press
the
/ENTER button and then use
button to select the desired items.
C
Press
the
/ENTER button and then use
the
/
buttons to adjust the setting.
Mode
Select the picture mode (Vivid, Standard, Energy
Savings, Theater, Sports or Custom).
Brightness
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Color
This will adjust the saturation level of the colors to suit
your personal preference.
Tint
Allows you to select the color mix (Tint) of the picture.
Sharpness
This will adjust the sharpness of fine details in the
picture.
Note
The picture options can only be adjusted in the
CUSTOM mode. The other picture modes are preset.
Advanced Video
To adjust the picture in advanced .The Advanced
Video menu contains the following options: Aspiect
Ratio, Overscan, Color Temperature, Backlight, Noise
Reduction, Adaptive Contrast.
Aspiect Ratio
Select Normal, Zoom, Wide, or Cinema.
Overscan
Turn this on to adjust the picture's reproduction rate
when receiving DVI signals in VIDEO format.
Available when the signal uses EIA timing(480i/480p/720
p/1080i/1080p).
Color Temperature
Select Warm (increased red), Normal, or Cool (increased
blue).
Backlight
/
Adjusts the overall brilliance brightness of the screen.
Noise Reduction
To adjust the reduction of the appearance of
digitizing errors produced by the compression: Off,
Low, Middle, High.
Adaptive Contrast
Turn this on to optimize the picture display for a
more vivid image.
Reset Picture Settings
Reset all Picture Settings to the factory mode.
Audio menu
How to select audio mode
A
Press the
buttons to select Audio menu.
B
Press
the
buttons to select Equalizer Mode.
MENU button and then use the
/ENTER buttons and then use the
Haier LED HDTV
Operation
/
/
EN-14
Advertisement
Table of Contents
