Table of Contents
Advertisement
desired picture,and then use the ENTER button to
enter the play interface.
To set the USB
A
Press the
USB button on the remote control to enter
the USB media mode.
B
Press the
MENU button, and the use the
/
buttons to select Settings, Press the ENTER
button to enter.
OK Enter
C
Use the
/
buttons to select MP3 Sort , and then
press the
button to enter . Use the
to select the way to sort the MP3 songs . Press the
ENTER button to confirm the selection.
Select
D
Use the
/
buttons to select JPEG Thumbnail Size
, and then press the
interface . Use the
/ buttons to select desired
thumbnail size of JPEG Pictures. Press ENTER to
confirm the selection.
EXIT Usb Home
/
buttons
OK Enter
button to enter the select
Select
Note
Do not remove the USB device from the
TV until you have exited the USB mode
otherwise you may damage the USB device.
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and
regular cleaning can extend the amount of time you
will have your new TV. Be sure to turn the power off
and unplug the power cord before you begin any
cleaning.
Cleaning the Screen
A
Here's a great way to keep the dust off your
screen for a while. Wet a soft cloth in a mixture
of lukewarm water and a little fabric softener or
dish washing detergent. Wring the cloth until it's
almost dry, and then use it to wipe the screen.
B
Make sure the excess water is off the screen, and
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft,
dry, lint-free cloth. Please be sure not to use a wet
cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
Operation / Maintenance
OK Enter
Haier LED HDTV
EN-24
Advertisement
Table of Contents
