Table of Contents
Advertisement
Operation
Operation
In the manual, the OSD (on screen display) may be
different from your TV's, because it is just an example to
help you with the TV operation.
There are several options you might need to set up in
order for your TV to work properly. Read the instructions
that follow.
Initial Setup: Set according to the screen display.
Switching On/Off the TV set
A
First, connect power cord correctly.
B
Select the viewing source by using the
button on the remote control.
C
When finished using the TV, press the
button on the remote control. The TV reverts to
standby mode.
D
If you intend to be away on vacation, disconnect the
power plug from the wall power outlet.
Note
If the TV in powers on , the screen will show
information according related to the type of input
signal, and then the information will disappear. If
there is no signal, "No Signal" will be displayed on
the screen.
Choose the Menu Language
When you start using your set for the first time, you must
select the language which will be used for displaying
menus and indications.
A
Choose
TV Input and then press the MENU button.
B
Press the
/
buttons to select the SETTINGS
menu.
C
Press the
/ENTER button and then use the
buttons to select Menu setting.
D
Press the
ENTER button and then use the
buttons to select language.
E
Press the
/ENTER buttons and then use the
/
buttons to select language.
( English, Français ou Espanol)
EN-13
Haier LED HDTV
Choose the Input source
Change the picture source so you can watch your TV, VCR,
DVD, Cable , or any other devices that are connected to
your TV.
A
INPUT
POWER
B
Picture Menu Options
The TV menu gives you an overview access to of the
menus you can select.
Note
How to select picture mode
The picture mode provides the pre-defined images
settings: Vivid, Standard, Energy Savings, Theater, Sports
and Custom.
A
B
/
C
/
You can also press the PICTURE button on the remote
Press the
INPUT button to enter the Select Source
menu and then use the
desired items source ( TV, Composite , Component1,
VGA , HDMI1, HDMI2, HDMI3,HDMI4 ).
Input Source
TV
Composite
Component
VGA
HDMI1
HDMI2
HDMI3
HDMI4
Press the
ENTER button to confirm .
may not be selectable.
Press the
MENU button and then use the
buttons to select Picture menu.
Press the
/ENTER buttons and then use the
buttons to select Mode.
Press the
/ENTER buttons to select the option
Vivid, Standard, Energy Savings, Theater, Sports and
Custom.
/
buttons to select the
/
/
Advertisement
Table of Contents
