Choose Your Connection; Dvd Setup; Vcr Connection - Haier L32K1 User Manual

External Equipment Connections

Choose Your Connection

There are several ways to connect your television,
depending on the components you want to connect and
the quality of the signal you want to achieve.
The following are examples of someways to connect
your TV. Choose the connection which is best for you.

VCR Connection

To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
COMPONENT IN
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
Connect the audio and video cables from the VCR's
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red). If you connect a S-VIDEO output
from VCR to the S-VIDEO input, the picture quality is
improved; compared to connecting a regular VCR to
the Video input.
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner's manual.)
10 TFT -LCD television Owner's Manual
VGA/DVI AUDIO
AV1
OUT
Select the input source with using the SOURCE button
on the remote control, and then press
select the source, press the

DVD Setup

How to connect
Connect the DVD video outputs (Y, P
to the COMPONENT (Y, P
the TV and connect the DVD audio outputs to the
AUDIO jacks on the TV' as shown in the figure.
If your DVD only has an S-Video output jack, connect
this to the S-VIDEO input on the TV and Connect the
DVD audio outputs to the AV IN jacks on the TV, as
shown in the figure.
COMPONENT IN
Note
If your DVD player does not have component
video output, use S-Video.
How to use
Turn on the DVD player, insert a DVD.
Use the S-Video button on the remote control to
select S-VIDEO or YP
b
Press Play button on external equipment for
program play.
Refer to the DVD player's manual for operating
instructions.
/ button to
button to confirm.
/C , P /C
b b r r
/C , P /C ) input jacks on
b b r r
VGA/DVI AUDIO
AV1
OUT
P /YC C mode.
r b r
)