Using A Direct Connection; Using A Bridging Adapter - AT&T PARTNER II Release 3.1 Installation Manual

NOTE:
The Call Assistant Intercom Autodialer is not regarded as a standard device.
This means you can connect a standard device to a system phone that also has
one or two autodialers installed.

Using a Direct Connection

Figure 2 shows how to connect a standard device directly to a system phone,
using the phone's built-in auxiliary jack.
To Wall
Figure 2. Combination Extension Using Direct Connection

Using a Bridging Adapter

Figure 3 shows how to connect a system phone and a standard device or two
standard devices together using the 267F2 bridging adapter.
Standard Device Only
System Phone or Standard Device
Figure 3. Combination Extension Using Bridging Adapter
Jack
To Standard
Device
Plug LINE into
gray jack
Plug AUX device
into white jack
AT&T
267F2
Adapter
Wall Jack
Installation Guidelines
7