AT&T OneVision DEFINITY G3 Fault Management Management Manual page 8

Verifying Connectivity
Map Merge
This section describes the Map Merge feature for GIS StarSENTRY.
NOTE:
You can skip this section if you:
About Map Merge
Map Merge allows GIS StarSENTRY users who have customized their map
database to integrate the new functionality of the unknown icon state into their
network map.
Map Merge has the following components:
Component
mapmerge
map_db
map_db.1
Running Map Merge
Follow these steps to run Map Merge:
1. Install Fault Management.
If you need help, see your OneVision DEFINITY G3 Fault Management
Installation and Integration guide.
NOTE:
For the following steps, be sure you use your own login ID so the file
that mapmerge generates contains your ownership permissions. If
you use someone else's login ID, (for example, root) you may
inadvertently change the ownership permissions for map_db.
8
Issue 1 June 1995
Are using the HP OpenView platform
Are not upgrading DG3FM to Release 1.0.1.
Description
The Map Merge run command.
The default filename for the map database.
If you renamed this file, substitute your filename in the
procedure described below.
The backup file for map_db.
AT&T backs up map_db and assigns the numbered suffix.
(If you renamed this file, AT&T adds the suffix to the new
name.)
This backup file contains the contents of your map
database as it existed before the you executed the run
command.