Data Refreshes; Refreshing Data Manually - AT&T OneVision DEFINITY G3 Fault Management Management Manual

Verifying connectivity

Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:

Table of Contents

Verifying Connectivity

Data Refreshes

You can verify that the Proxy Agent is connected to the switch while Fault

Management is running by refreshing the switch data.

Fault Management can refresh switch data only if the Proxy Agent is connected

to the switch. Therefore, if a refresh fails, the Proxy Agent has lost contact with the

switch.

Use the following steps to refresh data manually:

1. Access the Switch View screen.

2. Select one of the following options from the menu bar:

If . . .

The refresh succeeds

A pop-up window displays a message stating that the

refresh has failed

Issue 1 June 1995

Fault, then select Refresh Alarms and Errors

Configuration, then select Refresh Configuration Data

Then the

connection is . . .

Down

Table of Contents

Do you have a question about the OneVision DEFINITY G3 Fault Management and is the answer not in the manual?