Switch View; Warning Messages - AT&T OneVision DEFINITY G3 Fault Management Management Manual

Warning Messages

NOTE:
Neither of these messages display if the Refresh Proxy Agent On
Startup field on the Setup screen is set to FALSE. (You can access
this screen from the Options menu on the Switch View screen.)
The startup screen displays for a brief time. So, if you cannot read these
messages, you can verify connectivity by refreshing data while Fault
Management is running. (This process is described in the next section.)
Do not rely on the following message that displays on the Switch View to
verify connectivity:
SUCCESS all data retrieved from switch!...

Switch View

If the Proxy Agent has not established a connection to the switch during startup,
the following items display:
The Startup Refresh pop-up window displays in the center of the Switch
View. The message in this window informs you that the refresh failed.
NOTE:
This window displays only if the Refresh Proxy Agent On Startup field
on the Setup screen is set to TRUE. (You can access this screen
from the Options menu on the Switch View screen.)
A warning message also displays near the bottom of the Switch View. This
message is described below.
Warning Messages
If either of the following conditions are true, then the warning message shown
below displays in the message area of the Switch and Cabinet views:
The connection between the Proxy Agent and the switch was not up when
you started Fault Management
The last refresh failed
WARNING: The data displayed is based on non-refreshed cached
data and may be out of date.
This message:
Displays regardless of how the Refresh Proxy Agent On Startup field on
the Setup screen is set.
Is cleared from your screen after a successful alarms and errors refresh
(which indicates that the connection is up and new data received.)
5
Issue 1 June 1995