Group Coverage; Merlin Legend Communications System Release - AT&T MERLIN LEGEND Release 2.0 System Planning Forms Manual

MERLIN LEGEND Communications System Release 2.0

System Form 6d
Maximum: 32 groups. Make additional copies if more than 8 groups are assigned.
Coverage Delay Interval
3 rings
rings (1 - 9)*
Group No.**
Senders
Extension Nos.
Receivers†
Calling Group
o r
QCC queue‡
1
2
3
4
5
6
7
8
Factory Setting for both MERLIN LEGEND Communications System and for AUDIX Voice Power/FAX Attendant System.
* If the system has AUDIX Voice Power/FAX Attendant System, it will automatically set intervals to its defaults. If you choose
to change them, record the setting here and on the AUDIX Voice Power/FAX Attendant System forms. The settings must be
changed using Integrated Administration.
**If a group is the coverage group for AUDIX Voice Power/FAX Attendant System (the default is Group No. 30 but can be
changed), write "AUDIX/FA" by the group number and list the extensions of AUDIX Voice Power/FM Attendant System
subscribers (see Form 2a).
† A maximum of 8 multiline telephones can be used as receivers. The QCC queue can also be a receiver for Hybrid/PBX
mode only, but it is not counted in the 8 receiver maximum. If a calling group is the receiver, it must be the only receiver for
a coverage group. If the system has AUDIX Voice Power/FAX Attendant System, you do not need to fill in receivers here.
‡ HybridPBX mode only.

Group Coverage

Group No.**
Senders
Extension Nos.
Receivers†
Calling Group
o r
QCC queue‡
1
2
3
4
5
6
7
8
Delayed Ring Interval
2 rings
rings (1 - 6)*
Group No.**
Senders
I
Extension Nos.
Receivers†
Calling Group
o r
QCC queue‡
1
2
3
4
5
6
7
8
Group No.**
Senders
I
Extension Nos.
Receivers†
Calling Group
o r
QCC queue‡
1
2
3
4
5
6
7
8
Form 6 d - 1