AT&T MERLIN LEGEND Release 2.0 System Planning Forms Manual page 27

MERLIN LEGEND Communications System Release 2.0
System Form 3b
Incoming Trunks – DS1 Connectivity (100D Module)
Module 1 Slot No._______
Type of Service
T1 *
PRI**
T1 Trunks
Channel
Trunk Type
Number(s) TIE-PBX Toll
Ground Start
Loop Start
TIE
Unequipped
All Ground Start
All Loop Start
All TIE
All Unequipped
DID
All DID
Frame Format
D4 Compatible
Extended Super Frame (ESF)
Module 2 Slot No.
Type of Service
T1 *
PRI**
T1 Trunks
Channel
Trunk Type Number(s)
Ground Start
Loop Start
TIE
Unequipped
All Ground Start
All Loop Start
All TIE
All Unequipped
DID
All DID
Frame Format
D4 Compatible
Extended Super Frame (ESF)
Factory Setting
* The factory setting of '"T1" is not automatically selected if you enter nothing; it must be entered.
** "PRI" must be selected as the "Type" of DS1 connectivity before PRI options are entered.
Suppression (Line Code)
AMI-ZCS
B8ZS
Signaling Mode
For TIE/All TIE
Robbed Bit Signaling
(RBS)
Common Channel
Signaling (CCS)
Line Compensation
1
2(1.2dB)
3(1.8dB)
4 (2.4 dB)
5 (3.0 dB)
Suppression (Line Code)
AMI-ZCS
B8ZS
Signaling Mode
For TIE/AII TIE
Robbed Bit Signaling
TIE-PBX Toll
(RBS)
Common Channel
Signaling (CCS)
Line Compensation
1
2(1.2dB)
3(1.8dB)
4 (2.4 dB)
5 (3.0 dB)
Clock Synchronization
Cable Feet
(.6 dB)
Channel Service Unit
Clock Synchronization
Cable Feet
(.6 dB)
Channel Service Unit
Priority
Primary
Secondary
Tertiary
None
Source
Loop
Local
Activation
Active
Not Active
Foreign Exchange
Special Access
Priority
Primary
Secondary
Tertiary
None
Source
Loop
Local
Activation
Active
Not Active
Foreign Exchange
Special Access
Form 3 b - 1