Genie Bios Setting; Spread Spectrum Modulated; Cpu Clock Setting; Cpu Multiplier Setting - DFI LanParty KT400A User Manual

3
Award BIOS Setup Utility

3.1.8 Genie BIOS Setting

The settings on the screen are for reference only. Your version may not be
identical to this one.
3.1.8.1 Current CPU Frequency is
This field is used to show the current CPU frequency.
3.1.8.2 Lan Party LOGO Show
When Enabled, the Lan Party logo will appear during system
boot-up.
3.1.8.3 CPU/DRAM Clock Setting

Spread Spectrum Modulated

Leave this field in its default setting. Do not alter this setting un-
less advised by an engineer or technician.

CPU Clock Setting

This field is used to select the CPU's clock FSB.

CPU Multiplier Setting

This field is used to select the CPU's ratio.
86
Phoenix - AwardBIOS CMOS Setup Utility
Current CPU Frequency is
Lan Party LOGO Show
======= CPU/DRAM Clock Setting =======
Spread Spectrum Modulated
CPU Clock Setting
CPU Multiplier Setting
Current DDR Frequency is
DDR DRAM Clock
======= OverClocking Control =======
Current CPU Voltage is
Current AGP Voltage is
Current DIMM Voltage is
CPU Voltage Control
AGP Voltage Control
Chipset Voltage Control
DIMM Voltage Control
======= Onboard Device Control =======
USB 2.0 Support
Move Enter:Select +/-/PU/PD:Value
HP372N RAID Control
F5:Previous Values
IEEE1394 Chip Control
VIA-3043 OnChip LAN
VIA-3043 Lan Boot ROM
RTM Lan Device Control
RTM Lan Boot ROM
Serial ATA Control
Genie BIOS Setting
0 MHz
Enabled
Enabled
100
Default
By SPD
Auto
Auto
Auto
Auto
Enabled
F10:Save ESC:Exit
Enabled
F6:Fail-Safe Defaults
Enabled
Enabled
Disabled
Enabled
Disabled
Disabled
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults