Date & Time Set Procedure; Using The Cuff - HoMedics BPA-040 Instruction Manual

DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
2. The display will show a blinking number showing
the month. Change the month by pressing the
button. Each press will increase the number by
one in a cycling manner. Press the Set button
again to confirm the entry, and the screen will show
a blinking number representing the day of the
month.
3. Change the date and time as described in Step 2
above, using the
and the Set button
repeat process to set date and time
BPA-040_A.indd 15-16 BPA-040_A.indd 15-16
button to change the numbers
to confirm the entries.
Press the button
blinking month
increasing month
confirm the entry
13
USING THE ARM CUFF
. Very Important: Proper cuff size is critical to accurate
measurement.
This monitor comes with a standard size with a
standard size arm cuff that fits arms 9"–13"
(23 cm – 33 cm).
This cuff is suitable for your use if the colored arrow
falls within the solid color line as shown below.
If the arrow falls outside of the solid color line, you
will need a cuff with another circumference. Contact
HoMedics Consumer Relations at 1-800-466-3342.
Colored Arrow
MODEL# PP-BPCUFF5
Center tube over
middle of arm
Solid Colored Line
14
12/1/09 9:42 AM 12/1/09 9:42 AM