How This Blood Pressure Monitor Works; Name/Function Of Each Part - HoMedics BPA-040 Instruction Manual

HOW THIS BLOOD PRESSURE
MONITOR WORKS
This monitor uses Smart Measure™ Technology
to detect your blood pressure. With one touch of a
button, the cuff will automatically inflate to block the
blood flow through your artery. Next, the deflation
process starts. Smart Measure™ Technology enables
the monitor to automatically inflate and deflate to the
appropriate level for each individual. Please note that
any muscle movement during inflation or deflation
will cause measurement error. When measurement
is complete, the monitor will display your systolic
pressure, diastolic pressure, and pulse readings.
The monitor automatically finds where your measurement
results fall on the NIH's National Heart Lung and Blood
Institute's table and provides a cue if your reading falls into
one of the stages that could potentially indicate increased
risk. Please refer to page 20 for more information on this
feature.
BPA-040_A.indd 9-10 BPA-040_A.indd 9-10
7

NAME/FUNCTION OF EACH PART

Air Tube
and Connector
Arm Cuff
Date/Time
Set Buttons
START/STOP Button
Other Accessories
(not included):
4 "AA" size, 1.5V alkaline batteries
LCD Display
Memory Recall Button
Battery
Cover
( Located
on bottom
of unit)
8
12/1/09 9:42 AM 12/1/09 9:42 AM