Before Lighting; Model #Sp10 Cooker Lighting Instructions - Bayou Classic SP10 Owner's Manual

Model #SP10 Cooker - LIGHTING INSTRUCTIONS
WARNING
DO NOT stand with head, body or arms over the cooker when lighting. Loose clothing and hair can
catch fire during lighting and operation.
Follow these instructions exactly. Read and follow all warnings and instructions in this manual before
using your cooker.
1. Make sure regulator valve and cylinder valve are in the OFF position.
2. Turn ON the fuel supply by S-L-O-W-L-Y rotating the cylinder valve counter-clockwise one full turn.
HINT: Turning the cylinder valve quickly causes a sudden rush of gas that sometimes activates the
Gas Flow Limiting Device. To prevent this, always rotate cylinder valve S-L-O-W-L-Y.
3. Place fire place match or long lighter over the burner, then S-L-O-W-L-Y turn regulator valve
counter-clockwise until you hear gas HISSING to the burner. Then light the burner, keeping
hands and face away from the top of the cooker.
4. Adjust air control shutter on burner for a blue flame. In direct sunlight, flame may appear clear.
5. Adjust the regulator valve for desired flame height.
6. After lighting, rotate cylinder valve to full open.

BEFORE LIGHTING

Make sure LP Cylinder is OFF
1
LIGHTING
Place lit Match over Burner
3
Position hand
LIGHT
below burner
BURNER
HERE!
ADJUST Regulator Valve
for Flame Height
5
FOR YOUR SAFETY:
Make sure Regulator Valve is OFF
S-L-O-W-L-Y
Turn Regulator Valve ON
counter-clockwise
6
NOTE: The brass valve on
regulator hose assembly
controls flame intensity
only. It is not an
ON/OFF valve.
LP Cylinder Valve One Full Turn
2
ADJUST Air Control Shutter
4
After lighting Burner, OPEN
LP Cylinder Valve FULLY
16
S-L-O-W-L-Y Turn
counter-clockwise
Gas will flow
to and stop
at closed
regulator
for Blue Flame
DO NOT light burner
at air intake