Expansion Slots - ECS G41T-M6 Manual

Expansion Slots

Installing Add-on Cards
The slots on this motherboard are designed to hold expansion cards and connect
them to the system bus. Expansion slots are a means of adding or enhancing the
motherboard's features and capabilities. With these efficient facilities, you can in-
crease the motherboard's capabilities by adding hardware that performs tasks that are
not part of the basic system.
PCIEX16 Slot The PCI Express slot is used to install an external PCI Express
graphics card that is fully compliant to the PCI Express Gen 1.
PCIE1~2 Slots
The PCI Express x1 slots are fully compliant to the PCI Express
Base Specification revision 1.0a.
This motherboard is equipped with one standard PCI slot. PCI stands
PCI1 Slot
for Peripheral Component Interconnect and is a bus standard for
expansion cards, which for the most part, is a supplement of the
older ISA bus standard. The PCI slot on this board is PCI v2.3
compliant.
Before installing an add-on card, check the documentation for the
card carefully. If the card is not Plug and Play, you may have to
manually configure the card before installation.
Installing the Motherboard
15