Feature; Features - ECS G41T-M6 Manual

2

Feature

Processor
The motherboard uses an LGA775 type of Intel
®
Pentium Dual-Core/Celeron

features:

®
• Intel Core
series processors
• Supports a system bus (FSB) of 1333/1066/800 MHz
• Supports "Hyper-Threading" technology CPU
"Hyper-Threading" technology enables the operating system into thinking it's
hooked up to two processors, allowing two threads to be run in parallel, both on
separate "logical" processors within the same physical processor.
This board supports CPU up to 95W TDP.
Chipset
®
The Intel G41 Northbridge (NB) and Intel
based on an innovative and scalable architecture with proven reliability and
performance.
G41 (NB)
ICH7 (SB)
Memory
• Supports DDR3 1066 DDR3 SDRAM with dual-channel architecture
• Accommodates two unbuffered DIMMs
• 2 x 240-pin DDR3 DIMM sockets support up to 8 GB
®
400 series processors that carries the following
TM TM
2 Quad/Core 2 Duo/Pentium
®
ICH7 Southbridge (SB) chipsets are
• Supports 36-bit host bus addressing, allowing the CPU
to access the entire 64 GB of the memory address
space
• 2 GB/s point-to-point Direct Media Interface (DMI) to
ICH7 (1 GB/s each direction)
• Supports 1-Gb, 512 Mb DDR3 DRAM technologies for
x8 and x16 devices
• One, 16-lane (x16) PCI Express port intended for ex-
ternal device attach, fully compatible to the PCI Ex-
press Gen 1
• An integrated graphics device (IGD) delivering cost
competitive 3D, 2D and video capabilities
• Microsoft DX10 and 128 MB share memory are sup-
ported
• Enhanced DMA Controller, interrupt controller, and timer
functions
• Compliant with PCI Express Base Specification, Revi-
sion 1.0a
• Compliant with PCI v2.3 specification
• Integrated SATA 3.0 Gb/s Host Controller
• Integrated USB 2.0 Host Controller supporting up to
eight USB 2.0 ports
• Integrated IDE controller supports Ultra ATA 100/66/33
Introducing the Motherboard
® TM TM
Core 2 Quad/Core 2 Duo/
® ®
Dual-Core/Celeron 400