Importing Audio From A Cd - DigiDesign Mbox 2 Pro Getting Started Manual

Choose Track > Input Only Monitoring. This al-
2
lows you to monitor the input of tracks that are
record enabled.
Choose Window > Transport to display the
3
Transport window. Click Return to Zero to go to
the beginning of the session.
Return to Zero
Rewind
Online
Stop
Transport window
Click Record in the Transport window to arm
4
Pro Tools for recording. The Record button
flashes red to indicate that Pro Tools is ready to
record.
When you are ready to start recording, click
5
Play or press the Spacebar.
Record your performance.
6
Click Stop in the Transport window or press
7
the Spacebar when you are finished recording.
To play back a recorded track:
If the track's Record Enable button is lit, click
1
on it to take it out of Record mode.
Click Play in the Transport window or press
2
the Spacebar to start playback.
Click Stop in the Transport window or press
3
the Spacebar to stop playback.
Fast Forward
Play Go to End
Record

Importing Audio from a CD

To import audio from a compact disc:
Put the source CD into your computer's
1
CD/DVD drive.
In Pro Tools, open the Workspace browser by
2
choosing Window > Workspace. The Workspace
browser is a window where you can find, audi-
tion, and manage your audio files.
Opening the Workspace browser
In the Workspace browser, click the Audio CD
3
icon to show the files on the CD.
Click the speaker icon in the Waveform col-
4
umn to audition the audio file. Press the Space-
bar to stop playback.
Auditioning an audio file in the Workspace browser
Chapter 8: Common Tasks with Pro Tools LE 49