DigiDesign Mbox 2 Pro Getting Started Manual page 39

Gain Controls
These knobs adjust the input gain levels of their
corresponding input (Input 1, Input 2, or
Aux In).
DI Inputs
Front panel DI connectors are provided for in-
put channels 1 and 2, to connect electric guitar,
electric bass, and similar instruments.
Mic/DI Source Selectors and LEDs
These switches select either the Mic (XLR) and
Line (TRS) inputs or DI inputs for each channel.
The DI and Mic LEDs indicate the current source
input.
The Aux In Source select switch selects the Aux
Line inputs, or Phono inputs.
For more information, see "Connecting Audio
Inputs" on page 37.
Peak LEDs
Input 1, 2 and the Aux Input have Peak LEDs
that also function as signal meters. They light
green at –60 dBFS, yellow at –6 dBFS, and red at
0 dBFS (peak).
Pad Switches and LEDs
The Pad switches engage a –20 dB pad on their
corresponding input channels. When engaged,
the Pad LEDs light.
Chapter 6: Hardware Overview 31