Table of Contents
Advertisement
Navigation Hints
Programming parameters are displayed in the same order as the Programming Sheets (see
Figures 4-5 to 4-8). To skip over parameters that do not require changes, push and hold the
ENTER push–button until the desired parameter is displayed. The EXIT push–button may be
used to scroll backwards through the programming parameter loops.
To change a parameter value, use the INCREMENT or DECREMENT push–buttons to scroll
through the available options or to adjust a value as desired and press the ENTER to accept the
new value.
Note: If programming mode is terminated before the last change is accepted (pressing ENTER),
that parameter value will remain unchanged.
Main Menu Loop
The Main Menu Loop contains general system configuration programming such as system input
voltages, currents, transformer ratios, as well as standard operating time delay functions.
MN2408
Operation 4-13
Hide quick links:
Advertisement
Table of Contents
