Specifications - Apogee Mini-DAC User Manual

Features & Specifications
• Inputs include AES (single & double wide), Optical (ADAT, S/MUX & S/PDIF) coax, & USB
• Analog Output level control for direct connection of powered monitors
• Low-current, low-voltage -ideal for location/ENG
• Digital thru mode adds USB functionality to any digital device including Apogeeʼs Mini-Me, Trak2 and Rosetta
Inputs:
• 2 x AES-EBU on 9 pin D-Type (breakout cable to two female
XLR-3 required) handling sample rates: 44.1k-192k single-wide
and 88.2 k–192k double-wide.
• S/PDIF optical on TOS-LINK 44.1/48k
• S/PDIF coaxial on RCA 44/1-192k
• ADAT 44/1-48k
• ADAT/SMUX II for 88/2/96k
• ADAT/SMUX IV for 176.4/192k
• USB at 44.1/48k
Outputs:
• 2 x XLR (pin 2 – hot) for pro-audio stereo
• 1/8" jack for consumer-level stereo (standard 1/8" to RCA
cable required) also able to drive headphoneʼs
• 1/4" jack headphone
• USB
Due to on-going development Apogee reserves the right to change all information and specifications without notice.
Specs:
• Output level xlrʼs: 24dBu max (internally or externally adjustable) ultra
low impedance, high current drive balanced outputs.
• Output 1/8": +7dBV max (fixed or externally adjustable)
• Headphone out: 300mW into 30 ohm
• Sample rates: 44.1/48-88.2/96-176/192 . All +/- 10%
• Max word length: 24bit
• Frequency response: 10-20k +/- 0.2 dB (at 44.1kHz)
• THD+N: -104 dB
• Dynamic range: 119 dB weighted
• Inter channel crosstalk: -125 dB
• Power consumption: 6.5W max.
• Power source: 6-14 V DC. International (90-240V) power adapter included
Mini-DAC – User's Guide
15
APOGEE ELECTRONICS