Unpacking; Operation - Apogee Mini-Me Owner's Manual

2-channel portable 44.1/48/88.2/96 khz sampling 24-bit a/d converter with mic/instrument preamp
Hide thumbs Also See for Mini-Me:
Table of Contents

Advertisement

Standard Interfaces
The Mini•Me includes AES/EBU (XLR) and S/PDIF (RCA/coaxial) outputs which are available simultaneously,
clocked by a high-stability reference crystal oscillator, making the Mini•Me an ideal master clock.
Direct/Return Mix Monitor
A comprehensive mono/stereo monitor section allows you to balance the direct sound you're recording with
audio returned via the USB port.
Battery Power
The Mini•Me 's low power consumption makes it ideal for battery operation. The standard power unit includ-
ed) supplies 12v DC at up to 1.25A (connector is center-positive), but the unit can be run on sources from 6 to
14 volts DC. Several suitable battery packs are available from third-party suppliers.
Your Mini•Me is packed in a foam lined shipping container. Please be sure to save the container and foam for
any future shipments of the unit.
Included Accessories
The following accessories are shipped with the Mini•Me .
Universal 12-volt power supply
Operation manual (this document)
Warranty Card
Optional Accessories
Carrying Case
A carrying case is available, complete with strap and extra pockets for batteries (optional), tapes, etc. The
carrying case is made of rugged black nylon, contains a main pouch for the Mini•Me that features protective
flaps with zippers to allow cable access to the rear panel. The extra pockets are ideal for stowing other options
or personal items.
USB Option Card
The USB Option Card may be retrofitted on any Mini-Me delivered without this option. Please refer to the
"Application Notes" section of this manual for installation instructions.
Your Mini•Me is shipped ready to use in conjunction with AES/EBU and S/PDIF digital systems. In order to
use the Mini•Me with USB Audio, you must first download the driver from our website at
http://www.apogeedigital.com/usb.
All Apogee products spend at least two days 'burning-in' at the factory before delivery. This burn-in proce-
dure involves powered operation at elevated temperatures to isolate units that would possibly fail due to com-
ponent defects.
We recommend that you read this entire manual to get the most out of your new Mini•Me .
Mini•Me User's Guide

Unpacking

Operation

Page 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents