Page 1
C O N T E N T S page Parts List ........................1 Front & Rear Panels ....................2 Control Functions ....................3 Connection Functions....................3 Setting Up........................4 Bridged Mono Operation ..................5 Tube Insertion......................6 Operation ........................6 Troubleshooting......................7 Safety Instructions ....................8 Disclaimer of Liability....................8 Warranty........................9 Technical Specifications..................10...
-90 dB, IEC A weighted ref 1W read this manual carefully and follow these instructions in inventory of before steps are taken to make the Anthem -100 dB, IEC A weighted ref 200W order to keep your unit performing and sounding its best.
Page 3
Sonic Frontiers/Anthem Dealer. An authorized SF/ herein or resulting from any breach of this warranty or any Anthem dealer can resell the unit with the remaining implied warranty relating to said product. warranty if it is cosmetically acceptable, in perfect working...
Page 4
Sonic 4. Power Sources - This product should be connected to an Frontiers or Anthem dealer, distributor or the factory AC power source of the proper rated voltage. The original directly.
T R O U B L E S H O O T I N G S E T T I N G U P The Amp 2 comes with two (2) tubes, as follows: If at any time the Amp 2 fails to work properly, consult this 4.
Anthem Pre 2L. from the Amp 2’s LEFT – binding post to the RIGHT – binding post. No other connections are made to the black Connect the pre amp to the Amp 2 Inputs (E);...
Page 7
A M P 2 O P E R A T I N G M A N U A L D E S I G N E D A N D M A N U F A C T U R E D S O N I C F R O N T I E R S I N T E R N A T I O N A L...
Need help?
Do you have a question about the Amp 2 and is the answer not in the manual?
Questions and answers