What To Do If - AEG COMPETENCE B8871-4 User Information

What to do if ...

Problem
The oven does not heat
up
The oven lighting is not
operating
Pyroluxe is not working
("C1" appears in the clock
display)
The oven door is locked
The oven does not heat
up. Time
F1 appears in the display
F2 appears in the display
54
The oven is not switched on
The clock is not set
The required settings have
not been set
The oven's safety cut-out has
been tripped
The fuse in the house's elec-
trical wiring (fuse box) has
been tripped
The oven bulb is faulty
The oven shelf supports have
not been removed
Appliance is not connected
to the electricity; door lock is
activated
Demo mode is on
is lit
Door is not closed properly
The door cannot be opened
Possible cause Remedy
Switch the oven on
Set the current time on the
clock
Check the settings
See "Safety fuse"
Check fuse. If the fuses trip
repeatedly, please call an au-
thorised electrician
Change the oven bulb
Remove oven shelf support
Connect appliance to the
electricity and wait at least
15 minutes until the door
lock is automatically released
Keep Select button
pressed for 2 seconds, then
within 2 seconds press and
hold buttons Select
for 2 seconds
Close the door properly and
start the pyroluxe again. If
displayed again, please con-
tact your local Service Force
Centre
Switch off the appliance via
the house fuse or the safety
switch in the fuse box and
switch it on again.
If displayed again, please
contact your local Service
Force Centre
and