Dodge Ram Truck 2008 Owner's Manual page 97

• For identification purposes, you will be prompted to
give the UConnect system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
• You will then be asked to give your cellular phone a
priority level between 1 and 7, with 1 being the highest
priority. You can pair up to seven cellular phones to
your UConnect system. However, at any given time,
only one cellular phone can be in use, connected to
your UConnect system. The priority allows the
UConnect system to know which cellular phone to
use if multiple cellular phones are in the vehicle at the
same time. For example, if priority 3 and priority 5
phones are present in the vehicle, the UConnect
system will use the priority 3 cellular phone when you
make a call. You can select to use a lower priority
cellular phone at any time (refer to Advanced Phone
Connectivity in this section).
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
Dial by Saying a Number
• Press the PHONE button to begin.
• After the Ready prompt and the following beep, say
Dial.
• The system will prompt you to say the number you
want to call.
• For example, you can say 234-567-8901. The phone
number that you enter must be of valid length and
combination. Based on the country in which the ve-
hicle was purchased, the UConnect system limits the
user from dialing an invalid combination of numbers.
For example, in the U.S., 234-567-890 is nine digits
long, which is not a valid U.S. phone number - the
closest valid phone number has 10 digits.
• The UConnect system will confirm the phone num-
ber and then dial. The number will appear in the
display of certain radios.
3