Operation - Dodge Ram SRT10 Owner's Manual

The UConnect™ system is fully integrated into your
vehicle, including your vehicle's stereo system. All voice
prompts as well as the other party's voice in a conversa-
tion will be played over your vehicle's stereo system. The
volume of the UConnect™ system can be controlled
through your normal stereo controls.
The radio display will be used for visual prompts from
the UConnect™ system such as caller ID.

Operation

Voice commands can be used in the operation of the
UConnect™ system and to navigate through the UCon-
nect™ menu structure. Voice commands should be given
after each UConnect™ system prompt. You will be
prompted for a specific command and then guided
through the available options. There are two ways to give
commands to the UConnect™ system:
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75
• You can say Dial at the Ready prompt. When
prompted for the phone number you wish to dial, say
the phone number ( 123 456 7890 ).
Pairing a Cellular Phone to the UConnect™ System
To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone. To
complete the registration process, you will need to refer-
ence your cellular phone owner's manual.
• Press the 'Phone' button to begin.
• After the Ready prompt, say Setup .
• When prompted, say " Phone Pairing".
• You will be asked to say a four-digit pin number into
the UConnect™ system which you will later need to
enter into your cellular phone during the cellular
phone pairing process. You can enter any four-digit
pin number. You will not need to remember this pin
number after the initial registration process.
3