Manual Compass Calibration
NOTE: To ensure proper compass calibration, make
sure the compass variance is properly set before manu-
ally calibrating the compass.
If the compass appears erratic and the CAL symbol does
not appear, you must manually put the compass into the
"Calibration" mode.
To Put Into a Calibration Mode
Turn on the ignition and set the display to "Compass/
Temperature." Press and hold the RESET button to
change the display between VAR (compass variance) and
CAL (compass calibration) modes. When the CAL sym-
bol is displayed complete one 360 degree turn in an area
free from large metal objects or power lines. The CAL
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111
symbol will turn off and the compass will function
normally.
3