Table of Contents
Advertisement
ENGLISH
W
Specifications
n Turntable section
Driving system:
Speed:
Wow & flutter:
Starting time:
Turntable:
Motor:
Speed control system:
Load characteristics:
Speed deviation:
n Tone arm section
Arm form:
Effective arm length:
Overhang:
Tracking error:
Arm height adjustable range:
Stylus pressure variable range:
Suitable cartridge empty weight:
Head shell weight:
Cartridge spacer weight:
n Total
Power supply:
Power consumption:
Maximum external dimensions:
Weight:
9
Servo system direct drive
33–1/3rpm, 45rpm
Less than 0.1 % WRMS
Specified speed within 0.3 sec (for 33 rpm)
Aluminum die-cast, 331 mm (13-1/32") in diameter
Direct-drive motor
Quartz control
0 % with the stylus pressure 80 g (2.8 oz)
Within ± 0.003 %
Static balance S-shaped pipe arm
244 mm (9-39/64")
14 mm (35/64")
within 3°
about 6 mm (15/64")
0 to 4.0 g (0.14 oz)
One step 0.1 g
4 to 10 g (0.14 oz to 0.35 oz)
18 g (0.63 oz, including screws, nuts, nylon washers)
0.25 g (0.01 oz, 1 sheet)
AC 120 V, 60 Hz
10 W
With dust cover closed:
490 (W) ×213 (H) × 405 (D) mm (19-19/64" x 8-25/64" x 15-15/16")
With dust cover open:
490 (W) ×515 (H) × 465 (D) mm (19-19/64" x 20-9/32" x 18-5/16")
15.7 kg (0.55 oz)
n Cartridge (DL-A100)
Power generation method:
Moving coil (MC) type
Output voltage:
0.3 mV (1 kHz 50 mm/sec horizontally)
Channel balance:
within 1 dB (1 kHz)
Channel separation:
more than 25dB (1 kHz)
Impedance:
40 Ω ± 20 %
Compliance:
5 × 10-6 cm/dyne (used 100 Hz record)
Stylus tip:
0.2 mm (1/64") square solid diamond
Stylus pressure:
2.5 g ± 0.3 g (0.09 oz ± 0.01 oz)
Frequency response:
20 Hz to 45 kHz
Weight:
8.8 g (0.31 oz)
Load resistance:
more than 100 Ω (40 Ω when a transformer is used)
Maximum external dimensions:
15 (W) × 15 (H) × 26.8 (D) mm (19/32" x 19/32" x 1-1/16")
zFor purposes of improvement, specifications and design are subject to change without notice.
Advertisement
Table of Contents
