Danfoss FP715Si User Manual page 2
Electronic 2-channel full programmer for heating and hot water with service interval timer
Hide thumbs
Also See for FP715Si:
- Installation & user's instructions (36 pages) ,
- Installation manual (20 pages) ,
- User instructions (2 pages)
Table of Contents
Advertisement
FP715Si
Electronic 2-Channel Full Programmer for
GB
Heating & Hot Water with Service Interval Timer
For a large print version of these instructions
please call Marketing on 0845 121 7400.
Certification Mark
Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other
printed material. All trademarks in this material are property of the respective companies.
Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2
FP715SI
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FP715Si and is the answer not in the manual?
Questions and answers
My panel is lossing time what’s the problem
Possible causes for the Danfoss FP715Si panel losing time include:
1. Power Interruptions – Users report that turning off the main power and switching it back on can reset the display, which suggests that power cuts or surges may affect the unit’s timekeeping.
2. Internal Faults – Some users mention the display going blank while the heating remains on, which could indicate an internal electronic fault affecting the clock function.
3. Button Sticking – If buttons get stuck, as noted by an experienced user, this could cause erratic behavior, possibly impacting timekeeping.
4. Aging Components – Another user mentioned the display dimming over time, which could suggest electronic wear that may also affect the device’s ability to maintain the correct time.
5. Power Surges – Danfoss support suggested power surges might be a cause, which could disrupt the internal timer.
To address this, checking for stuck buttons, ensuring stable power supply, and possibly resetting or replacing the unit may help.
This answer is automatically generated