Making A Full Reset - Danfoss FP715Si User Manual
Electronic 2-channel full programmer for heating and hot water with service interval timer
Hide thumbs
Also See for FP715Si:
- Installation & user's instructions (36 pages) ,
- Installation manual (20 pages) ,
- User instructions (2 pages)
Table of Contents
Advertisement
2.5 Making a Full Reset
If it is necessary to fully reset the unit, excluding the date and time,
follow the instructions below.
1.
Press and hold the +1HR and MAN buttons on the left hand side
of the product.
+1HR
MAN
2.
Press the RESET button and hold for 3 seconds.
3.
Release the RESET button. The display will change to show the
current time.
4.
Finally, release both the +1HR and MAN buttons.
The unit is now fully reset and must be re-programmed, see pages
10-14.
Danfoss Heating
+1HR
MAN
Example
GB
19
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FP715Si and is the answer not in the manual?
Questions and answers
My panel is lossing time what’s the problem
Possible causes for the Danfoss FP715Si panel losing time include:
1. Power Interruptions – Users report that turning off the main power and switching it back on can reset the display, which suggests that power cuts or surges may affect the unit’s timekeeping.
2. Internal Faults – Some users mention the display going blank while the heating remains on, which could indicate an internal electronic fault affecting the clock function.
3. Button Sticking – If buttons get stuck, as noted by an experienced user, this could cause erratic behavior, possibly impacting timekeeping.
4. Aging Components – Another user mentioned the display dimming over time, which could suggest electronic wear that may also affect the device’s ability to maintain the correct time.
5. Power Surges – Danfoss support suggested power surges might be a cause, which could disrupt the internal timer.
To address this, checking for stuck buttons, ensuring stable power supply, and possibly resetting or replacing the unit may help.
This answer is automatically generated