Changing Shooting Function Settings; Turning Off The Af Assist Beam - Canon 4344B005 User Manual

Changing Shooting Function Settings

If you set the mode dial to G, you can change the settings in the 4 tab
(p. 49).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 182
Switching the Focus Setting
The camera focuses on whatever it is aimed at even when the shutter button
is not pressed. However, you can set it so that the camera only focuses when
the shutter button is pressed halfway.

Turning Off the AF Assist Beam

The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
158
– 185).
●
Choose [Continuous AF], then press the
qr buttons to choose [Off].
On
Off
●
Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
Since the camera focuses continuously
until you press the shutter button
halfway, it allows you to shoot without
missing photo opportunities.
The camera does not focus
continuously, thereby conserving
battery power.