Setting Up The Lcd Monitor; Power Management System; Chapter 2 Display Controls; User Controls - Acer LCD Monitor Manual

Setting Up the LCD Monitor

1. Turn on the LCD monitor's hard power switch, located on the back of the monitor
(See Fig. 1-8)
2. Turn on the LCD Monitor's soft power switch, located on the bezel of the monitor.

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power
saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicator will light yellow.

Chapter 2 Display Controls

User Controls

A brief description and the location of all LCD Monitor function controls and indicators:
1 Stereo Speakers
2
Speaker Volume Control
3
Soft Power Switch
4
DC Power-On Indicator
5
Function Select Buttons
6 Adjustment Control Buttons
7
External Headphone Jack

Adjusting the Monitor's Display

The monitor has four function control buttons to select among functions shown on OSD menu, designed
for easy user-viewing environments.
OSD Function Menu
To access OSD Main menu, simply press one of the Function Select control buttons,
and the menu diagram will pop up on the screen as shown on Fig. 2-2:
Continue pressing the Function Select buttons to scroll through the entire menu items
,then press Adjustment Control buttons to adjust content of selected item.
Attention: Firmware revision may have been updated into a latest version while the version number shown on all OSD
menus in this manual will stay as Ver. 1.00.
Figure 2-1
PC Audio Stereo output.
Increase Volume - Turn the knob clock wise.
Decrease Volume - Turn the knob counter clock wise.
Press the soft power switch to switch the monitor ON/OFF.
LED lights Green color --- Power is ON.
LED lights Yellow --- Monitor is in "Power Saving Mode".
LED is off --- Power is OFF.
Press either left or right control button for OSD (On Screen Display)
menu selection.
Press the left button to decrease the OSD setting and press the right
button to increase the OSD setting.
The monitor speakers will be disabled when using an external
headphone or external speakers.
4
Figure 1-8
Figure 2-2