Setting Up The Lcd Monitor; Power Management System; Chapter 2 Display Controls; User Controls - Acer LCD monitor Manual

Setting Up the LCD Monitor

1. Make sure the AC Adapter is connected to the LCD Monitor.
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS
provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.

Chapter 2 Display Controls

User Controls

A brief description and the location of all LCD Monitor function controls and indicators:
Stereo Speakers
1
Speaker Volume Control
2
DC Power Switch
3
DC Power-On Indicator
4
Function Select Buttons
5
Adjustment Control Buttons
6
External Headphone Jack
7

Adjusting the Monitor's Display

This LCD monitor features an "Intellectual-AUTO" function, which stores up to 16 user's settings. When new settings
are made, this function will check whether this setting has been Auto-adjusted before. If so, this monitor will use those
settings. If not, this monitor will automatically start Auto-adjustment to obtain the best viewing settings. The auto-
adjustment process takes 3 ~ 5 seconds to complete during which a "Auto Adjusting..." message will be shown on
your screen.
The monitor has four function control keys among the functions shown on the OSD menu, designed to create an easy
user-viewing environment.
OSD Function Menu
To access OSD Main menu, simply press one of the
Function Select control buttons, and the menu diagram
will pop up on the screen as shown on Fig. 2-2:
Continue pressing the Function Select buttons to scroll
through the entire menu items ,then press Adjustment
Control buttons to adjust content of selected item.
Figure 2-1
PC Audio Stereo output.
Increase Volume - Turn the knob clock wise.
Decrease Volume - Turn the knob counter clock wise.
Press the power switch to switch the monitor ON/OFF.
LED lights Green color --- Power is ON.
LED lights Yellow --- Monitor is in "Power Saving Mode".
LED is off --- Power is OFF.
Press either left or right control button for OSD (On Screen Display) menu
selection.
Press the left button to decrease the OSD setting and press the right
button to increase the OSD setting.
The monitor speakers will be disabled when using an external
headphone or external speakers.
5