Table of Contents
Advertisement
Loan file overview
Duplicating loan files: Save As
The Save As method for duplicating prospect and borrower loan files copies only the loan
file into a new file. The Save As method does not copy any documents that were
generated by using one of the interfaces, such as a credit report or an appraisal.
To duplicate prospect and borrower files by using the Save As function:
Open the loan to use as the source. The source loan file must be a previously saved
1
loan.
Select File > Save As.
2
The
Select a data folder and the file type (
3
By default, the
4
are disabled if auto file naming is turned on for the selected folder.
•
•
72
Changes to DRE regulations required the removal of one set of user-
defined fields in the Payment of Other Obligations list on both MLDS
screens. Therefore, if you create a new loan file from a loan file that was
created in an earlier Point version, any data that was in the fields that
were removed is lost. To include those obligations in the new loan file,
you must combine the additional obligations and enter the total in the
remaining user-defined field manually.
Save As
dialog box is displayed.
Use Auto File Naming
To automatically name the file by using the automatic file naming convention that
is specified in the auto file naming function, leave the
check box selected.
To specify a file name of your choice, uncheck the
box to enable the file naming fields.
–
Type the file name in the
–
Select a file type from the Save as type dropdown list.
Important
Prospect
Borrower
or
check box is selected and the file naming fields
Use Auto File Naming
field.
File name
).
Use Auto File Naming
check
Calyx Software
Advertisement
Table of Contents
