Enter (or verify) the address, and click OK.
2
Specifying the CA Fair Lending address
Use the CA Fair Lending Address option to enter the address to send the CA Fair
Lending notice.
To configure the CA Fair Lending address:
Select Utilities > Company Defaults > CA Fair Lending Address.
1
Enter (or verify) the address and click OK.
2
Specifying the credit denial administrator address
Use the Denial Letter Address option to specify the address of the federal agency that
administers compliance with Regulation B of the Equal Opportunity Act. Point
automatically populates the address on the Statement of Credit Denial, Termination, or
Change form when it is printed.
To enter the credit denial compliance agency address:
Select Utilities > Company Defaults > Denial Letter Address.
1
Enter (or verify) the address and click OK.
2
Specifying default settings for the Servicing Disclosure statement
Use the Servicing Disclosure Info option to enter default settings for the Servicing
Disclosure Statement.
To complete the servicing disclosure information:
Select Utilities > Company Defaults > Servicing Disclosure Info.
1
The
Select the applicable options.
2
Click OK.
3
Entering HMDA registration information
Use the HMDA Register Info option to open the
Information
applications with the HMDA.
Point User Guide
Servicing Disclosure Statement Information
dialog box. This information is stored and is used when you register loan
Company default information
dialog box is displayed.
HMDA Loan App Register
41