The following figure shows a setup with an external ef-
fects unit connected via the FX LOOP. What's more, the
RECORDING output is connected to a mixer's line chan-
nel to feed the signal to a recording device. The speaker
signal of the connected loudspeaker is picked up by a
microphone and is fed to the mixer via a mic input. This
way you get a second guitar signal that is amplified over
a PA system or can be recorded additionally or both.
en
8
Set-up for live playing
Audio connections
The inputs and outputs of the BUGERA amplifier use
mono jack connectors.
Audio connections
¼" mono jack connector