Audio Connections - Bugera 6262-212 User Manual

The following figure shows a setup of the 6262-212 to-
gether with an external effects unit connected over the
FX LOOP. And the PREAMP OUT is connected to the line
input of a mixer in order to send the signal to a recording
device. In addition, the speaker signal of the BUGERA is
picked up by a microphone and is fed to the microphone
input of the mixer. This way you get a second guitar sig-
nal which then can be amplified by a PA system and/or
can be recorded as well.
Live setup with a BUGERA combo

Audio connections

The inputs and outputs of the BUGERA amplifier use
mono jack connectors.
Audio connections
¼" mono jack connector
en
9