Selecting A Single/Repeating Pattern; Changing The Thread Density (Satin Stitch Patterns Only) - Brother NX-2000 Operation Manual

EDITING STITCH PATTERNS

Selecting a Single/Repeating Pattern

Press to select whether the pattern is sewn
repeatedly or once.
Memo
If you press
and the machine will sew one copy of the
pattern, then automatically stop.
110
while sewing, the key changes to
Changing the Thread Density
(Satin Stitch Patterns Only)
After selecting a stitch pattern, press
desired stitching density is selected.
CAUTION
• If the stitches bunch when thread density is changed
to , return the thread density to
continue sewing when the stitches are bunched, the
needle may bend or break.
Memo
• Stitch patterns entered after the stitching density
was changed are added at the selected density until
it is changed again.
• You cannot change the stitching density of stitch
patterns once they have been combined.
until the
. If you