Brother NX-2000 Operation Manual page 148

ERROR MESSAGES
146
This message is displayed when
is pressed while the
presser foot is raised.
This message is displayed when
or
is pressed after a
pattern is selected.
This message is displayed when
is pressed while a utility
stitch is selected.
This message is displayed when a
stitch other than a buttonhole stitch
is selected and the "Start/Stop"
button or the "Reverse/
Reinforcement Stitch" button is
pressed while the buttonhole lever
is lowered.
This message is displayed while
upgrade file is being downloaded
to machine.
This message is displayed when
the bobbin thread is running out.
This message is displayed when
the bobbin is being wound, and the
motor locks because the thread is
tangled, etc.
This message is displayed when
the needle is in the down position
and the needle threader is lowered.
This message is displayed when
the "Start/Stop" button is pressed
while the foot controller is
connected.
This message is displayed when
the motor locks up due to tangled
thread or for other reasons related
to thread delivery.