Pintucks - Brother NX-2000 Operation Manual

d
Lay both seam allowances on the side of the
shorter one (cut seam allowance) and iron
them flat.
a Wrong side of fabric
e
Fold the longer seam allowance around the
shorter one, and then sew along the edge of
the fold.
a
a Wrong side of fabric
Finished flat fell seam
a
a Surface of fabric
a
a
a

Pintucks

Use pin tucks to decorate blouses.
a
Mark the positions of the folds on the wrong
side of the fabric.
a
a Wrong side of fabric
b
Turn the fabric over, and then iron only the
folds with the tip of the iron.
a Surface of fabric
c
Press , and then attach presser foot "I".
d
Attach the pin on the right side of presser foot
"I" to the presser foot holder, and then sew
along the folds.
* If the automatic reverse/reinforcement stitching and
automatic thread cutting settings are selected before
sewing, reverse stitches will automatically be sewn
at the beginning and end of the stitching and the
thread will be cut.
b
a
a Wrong side of fabric
b Surface of fabric
c Width of pin tuck
e
Iron the folds in the same direction.
SEWING THE STITCHES
a
c
I
3
61