Audiovox FRS122-2 Owner's Manual page 8

FRS122-2 OPERATIONAL MODES
FRS
(MODE)
NOTE:
To differentiate between operating modes, look for HI or LO
indication below the battery power level indicator when in
mode.Refer to the appropriate section of this manual for de-
tailed operating instructions for each mode. Channels 1 through
14 are shared FRS only,
Controls:
Power On-Off/SCAN Button (13)
Press and hold the PWR on/off button for at least 2 seconds. You will hear
a confirming melody to indicate the unit is on. To turn the unit off, press and
hold the button for at least 2 seconds.
Adjusting the Volume (11, 10)
With the unit powered on, press the Up Channel/Volume button (
increase volume and the Down Channel/Volume button (
CHANNEL
(1-14)
SELECT
CTCSS
(oF, 01-38)
SELECT
POWER
SELECT
ROGER
(on or oF)
BEEP
8
FRS
) to
) to decrease
128-6675
8 of 24