Setting Up Your Phone - Binatone Trend 3 Executive User Manual

4. Setting up your phone

Set Time/Date
1
MENU
2
MENU
3
4
MENU
5
6
MENU
7
8
MENU
9
Binatone Help Line - 0845 345 9677
Press the MENU button to enter the menu and
then use UP or DOWN buttons to cycle through
the following options:
SET 1 DATE
SET 2 LCD
SET 3 FLASH
Note: The system will time out if you leave more
than 8 seconds between key presses.
You will need to set the correct time and date
so they can be displayed correctly on the display.
If you subscribe to a Caller Display service, the
time and date will be set automatically on receipt
of your first incoming call.
In standby mode, press MENU button.
The display shows ' SET 1 DATE '.
Press MENU button to confirm.
The 'year' icon will be blinking.
Press UP or DOWN button to set the year.
Press MENU button to confirm.
The 'month' icon will be blinking.
Press UP or DOWN button to set the month.
Press MENU button to confirm.
The 'date' icon will be blinking.
Press UP or DOWN button to set the date.
Press MENU button to confirm.
The 'hour' icon will be blinking.
Press UP or DOWN button to set the hour.
When setting the 'hour', the 'AM' or 'PM' icon
will automatically turn on to correspond the
hour time.
Calls are charged at Local Call rate.
6