Installation - Binatone Trend 3 Executive User Manual

2. Installation

1. Locating the Base unit
The Base unit should be placed on a level surface, in a position where:
the telephone line cable will reach your telephone line socket or
extension socket.
it is not close to a sink, bath or shower, or anywhere else where it
might get wet.
it is not close to other electrical equipment - fridges, washing
machines, microwave ovens, TVs, fluorescent lights, etc.
2. Plug the coiled handset
cord into the Handset.
Plug the other end into
the jack on the left
side of the Base unit.
3. Place the Handset in
the Base unit.
Always use the
telephone line
cord supplied
with your Trend 3
Executive phone.
Other telephone
line cords may
not work.
Binatone Help Line - 0845 345 9677
make sure the
plugs click
into place.
4. Plug the telephone line cord
free end into a modular wall jack.
Press the cable into the groove
so that the Base unit stands level.
5. Lift the Handset and check for
Dial tone in the earpiece.
Calls are charged at Local Call rate.
3