Remove Card Along Perforations; Beltronics V995 Quick Reference Card - Beltronics Vector 995 Owner's Manual

Congratulations
The Beltronics V995 is the most advanced
radar,laser and safety detector ever
designed by Beltronics.
The V995 includes full X,K,SuperWide
Ka,and Safety Warning System radar
capability,front and rear laser detection,
varactor-tuned (VTO) microwave receiver,
digital signal processing (DSP) for superior
range and reduced false alarms,our
patented Mute and AutoMute,audible and
visual band alerts,and all the performance
you'd expect from Beltronics.
In addition,the V995 introduces the
following revolutionary features:
• Varactor-tuned receiver provides
long-range protection against all
radar threats
• New easy-to-use Programming lets
you customize up to 7 features
• New AutoScan mode intelligently
reduces unwanted false alarms,plus
Highway and City settings
• Ultra-bright text-display provides
easy to read information from any
angle
• NewTech Display provides actual
numeric radar frequency for any
radar signal
• New Programmable Bands (on/off)
• Detects and decodes Safety Warning
System messages
If you've used a radar detector before,
a review of the Quick Reference Guide on
pages 4 and 5,and the Programming
information on pages 12 and 13 will briefly
explain the new features.
If this is your first detector,please read
the manual in detail to get the most out of
your V995's outstanding performance and
innovative features.
Please drive safely.
FCC Note:
Modifications not expressly approved
by the manufacturer could void the
user's FCC granted authority to operate
the equipment.
There are 7 user-selectable options so you
can customize your V995 for your own
preferences.
The buttons labeled CITY and BRT are
also used to enter the Program Mode,
REVIEW your current program settings,
and to CHANGE any settings as desired.
The words PGM,RVW and CHG are
located on the top of the detector,and are
highlighted in graphics.
How to use Programming
1
To enter Program Mode, press and
hold both CITY and BRT buttons down
for 2 seconds.The unit will beep twice,
and will display the word Program.
2
Then press the RVW button to review
the current settings.You can either tap
the button to change from item to item,or
hold the button to scroll through the items.
3
Press the CHG button to change any
setting.You can either tap the button to
change from setting to setting,or hold the
button to scroll through all the options.
4
To leave Program Mode, simply wait
8 seconds without pressing any
button.The unit will display Complete,
beep,and return to normal operation.
Factory Default Settings
To reset your V995 to its original factory
settings,press and hold the"CITY"and
"BRT"buttons while turning the power
on.The V995's display will provide a
Reset
audible alert,acknowledging the reset.
1
Quick Reference Card
 Remove card along perforations 

Beltronics V995 Quick Reference Card

An example
Here is how you would turn the V995's
AutoMute feature off.
1 Enter the Program Mode by holding
both the CITY and BRT buttons down for
2 seconds. The V995 will beep twice and
display Program.
2 Then hold the RVW button down. V995
will scroll through the categories, starting
with Display (Pilot), then Voice (Voice),
then Power-On sequence (PwrOn), then
Signal Strength Meter (Meter), and then
AutoMute (aMute).
3 Release the RVW button when the V995
shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
the V995 will display aMute
If you accidentally don't release the
Review button in time, and the V995 goes
to the next category, hold the RVW button
down again, and after the V995 scrolls
through all categories, it will begin again
at the top of the list.
4 Press the CHG button to change from
aMute ON to aMute OFF.
5 To complete the Programming,simply
wait 8 seconds without pressing any
button.TheV995 will display Complete,
beep 4 times, and return to normal
operation.
message,accompanied by an
Preferences Details 
ON.